 444 Carpenter Avenue P.O. Box 427 Wheeling, IL 60090-0427 Phone 847-541-5600 FAX 847-541-1279 Toll Free 800-704-2002 |
FOR SALE
(1)10,000KW Combined Cycle Plant Natural Gas 4160V/34.5KV 2001 7.2MW Solar Taurus 70 Combustion Turbine Natural Gas 170,000#/Hr. E.R.I. HRSG 500 psig @ 650°F Natural Gas 3.5MW G.E. Steam Turbine Generator 3/60/4160V |
 |
 |
(1) 7.2 MW Solar Taurus 70 gas turbine, natural gas fueled, operated at 340 psig (can be converted to liquid or dual fuel). Equipped with SoLoNOx. Manufactured in 2001. Taken out of service in 2/08 and laid up by Solar. Always serviced under Solar maintenance contract. Turbine engine rotor, combustors, liners, injectors, and new bearings rebuilt to '0' hours and installed 7/08. Mounted on heavy skid base frame in sound attenuated enclosure with main gearbox and 4160V generator with exciter and governor. Unit is electric start with synchronizing and paralleling switchgear, microprocessor based controls, air inlet filtration system, fire protection system, exhaust muffler, lubricating system, fuel handling system, vibration monitor, silencer and interconnecting ducting. Heat Rate – 10,363 BTU/KW/HR. Exhaust temperature 913°F. NOx level of emissions: – 18.84 PPM or .069#/MM BTU’S Approximate Dimensions: 37'L x 8'-11"W x 8'-11"H
Approximate Shipping Weight: 106,000 lbs
(1) 170,000 #/hr E.R.I. HRSG, 500 psig DP @ 650°F SH package watertube boiler Series MFA-5-120-SH. Shop assembled 'A' type design, composed of: 54" ID steam drum and (2) 24" OD lower drums with 2" OD tubes. Total heating surface 29,877 sq. ft. Boiler has a 2,022 sq. ft. ±650°F. superheater, and 22,351 sq. ft. economizer. Built in 2001 accordance with ASME code and bearing NB and HSB stamping. Equipped with a Verloop package natural gas burner. Equipped with combustion safeguard controls, fuel trains, duct connection to combustion turbine having 954°F gas temperature input. Boiler will generate 27,400 #/hr with its own burner, with inlet guillotine damper closed. Includes all standard boiler valve trim, regulators and controls, FD fans with motors, interconnecting piping and ductwork and valves. Approximate Dimensions: 63'- 5"L x 11'W x 17'- 5" H
Approximate Shipping Weight: Also available – *Deaerating Feedwater Heater *(3) motor driven boiler feed pumps with associated starters *Water treatment and filtration system *Stack (1) 3500 KW GE extraction, back pressure (non-condensing) steam turbine generating set composed of a multi-stage, multi-valve steam turbine presently operating at 400 psi @ 650°F with A.E. 125 psig and 30# BP exhaust. Direct connected to an 8000 KVA GE A.C. generator, 3/60/4160V with exciter, throttle valve, new electronic governor ,oil lube system with pumps, new controls and switchgear. Present steam rate is ±30.3 #/KW-HR. Unit was originally rated at 3500 KW as a straight condensing unit, operated at 190 psig @ 843.7°F, 1.5" HG ABS exhaust at 4160V. This 12-stage multi-valve turbine was reworked and rerated to the above extraction, back pressure machine. The 10th stage was removed for the 30# back pressure feature. Turbine rows 1-7 were replaced with new, and some nozzles were replaced. The generator and rotor have been rewound, therefore upgraded in capacity with the addition of a new generator cooler. The original rotating exciter is stored on site, along with a 3500 sq. ft Westinghouse surface condenser with circulating pumps, steam ejector, and lube oil filtering system. Also available and installed over the unit is a 25Ton x 20' Wide floor controlled Shaw box crane. Approximate Dimensions:
Approximate Shipping Weight: (1) 1000 KW standby, 910 KW prime, 832 KW continuous skid mounted Caterpillar model 3508B diesel electric generating set. The 4-cycle, V-8 turbocharged and after-cooled engine is rated 1480 BHP @ 1800 RPM. Single-bearing, closed coupled, direct connected to a CAT SR4B AC generator, 3/60/575-600V Wye, 1250 KVA, 4-wire, 4-pole. Insulation Class H, 130°C temperature rise / 40°C ambient. Equipped with digital voltage regulator, 1600 amp molded case circuit breaker, battery start system, remote annunciator, radiator cooling system with fuel oil cooler, battery charger, 1000 gallon base mounted tank, exhaust flex with muffler and relating components. Manufactured in 2001. Operated for 216 hours and shut down 10/6/07. Fuel rate – 71.2 GPH Approximate Dimensions: 16'L x 7'- 8"W x 11'- 1"H Approximate Shipping Weight: 28,000 lbs Also available: Dry Step Up transformer from 600V Wye GRD to 4160V Delta (1) 250 GPM @ 1380 FTDH Ingersoll-Rand centrifugal, horizontal, split boiler feed pump. Size and type: 2CNTA-6. NPSH – 29, Packing – Metallic, Glands – Smothering, 4"/300# suction, 2.5"/600# discharge. Cast iron casing and impellers, steel shaft, fast coupling. Connected to a 150 HP ODP motor, 3/60/575V. All mounted on common steel baseplate. Manufactured in 1974. Approximate Dimensions: 8'-6"L x 3'W x 2'-7"H Approximate Shipping Weight: 4,000 lbs (3) 450 GPM @ 1380 FTDH Flowserve Type 3WX-10A4 boiler feed pumps, 4"/300# suction, 3"/600# discharge, connected through coupling to 200 HP motors, 3/60/575V @ 3540 RPM, all mounted on common steel base, manufactured in 2002. Approximate Dimensions: 9'-8"L x 3'W x 3'H Approximate Shipping Weight: 3,000 lbs each (1) 90-325 GPM GE Glegg water treatment and filter system, 50-100 psig normal feedwater pressure at 45-85°F. Composed of (1) multi-media filter unit, (2) counter-current softener units, (1) Brine regeneration system. Equipped with Allen Bradley MicroLogix 1500 controls for the water filtration/softener system, manufactured in 2001. (1) 200,000 #/hr Elliott Deaerating Feedwater Heater with tray condenser, vertical design, 20 psig steam pressure @ 258°F. Equipped with valve trim and regulators. Approximate Dimensions: 6'-11 ¼" ID x 19'H Approximate Shipping Weight: 18,000 lbs IMMEDIATE DEliVERY |
|