115,000 #/hr Nebraska Boiler

Details / Specifications
Capacity115,000 #/hr
Quantity1
ManufacturerNebraska Boiler
AvailabilityImmediate
ModelN2S-6-080
Burner Manf.NATCOM
Design Pressure400psig
Operating Pressures (psig)375
Steam Temp. (°F)Saturated
Drum Type3 drum bent tube type, referred to as an "A" design, composed of a 42" I.D. steam drum and a 30" mud drum with 2" O.D. tubes
Code DesignBuilt in accordance with ASME code and bearing N.B., H.S.B. stampings and all Canadian CRN
NOx with FGR30 PPM
FuelNatural Gas / Oil
FanForced draft fan, 3/60/460V, TEFC motor with starter
Flame Monitoring SystemFireye Microprocessor
Control Circuit Tranformer3/60/460V
Valve TrimThe valve trim consists of: (2) feedwater block and (1) feedwater bypass valves, primary LWCO and (1) auxiliary LWCO and drain valves, (1) feedwater stop valve, (1) check valve, (1) set of water gauge and water column valves, (1) feedwater stop valve, (1) control valve, (1) chemical feed valve, (1) vent valve, (2) angle and straightway blowoff valves, (1) ASME approved safety valves and (1) steam gauge.
Approx. Dimensions36' -10" L x 12' -6" W x 15' -5" H
Approx. Shipping Weight (lbs.)140,000 lbs
Freight MethodRail
More InformationBoiler has a total heating surface of 6833 sq. ft

Siemens microprocessor combustion and feedwater control system actuating fuel valves, fan and windbox damper and air registers for burner air control valve and a Fisher feedwater control valve